You typed your district code, your username and your password correctly. Then FACTS asked for a verification code — and nothing arrived. You waited, checked your phone, checked your inbox, and still nothing. It is one of the most frustrating moments in the FACTS Family Portal, because you are doing everything right and the door still will not open.
The good news is that most verification-code problems have a simple cause, and most are fixed in a few minutes. This guide works through the causes in order, from the most common to the least, so you can find your fix without guessing.
Disclaimer: Therenweb.com is an independent guide. We are not affiliated with, endorsed by, or connected to FACTS Management, RenWeb, or FACTS SIS. Log in only on the official FACTS Family Portal — factsmgt.com, familyportal.renweb.com, logins2.renweb.com, or sis.factsmgt.com. Never share a verification code with anyone who calls, texts, or emails asking for it.
First, Which Kind of Code Are You Waiting For?
FACTS multi-factor authentication (MFA) uses one of two kinds of code. The fix depends on which one you chose, so be clear about yours before you start troubleshooting.
- Email code. FACTS sends a six-digit code to the email address on your Family Portal account. You type it into the login screen.
- Authenticator app code. An app on your phone generates a new six-digit code every 30 seconds. Nothing is sent to you; the app makes the code itself.
If you are waiting for an email that never comes, the problem is delivery. If your authenticator app shows no FACTS entry at all, the problem is setup. They are different problems with different fixes, and this guide covers both.
A quick reminder: from 22 April 2026, MFA is mandatory for all non-student FACTS accounts. That is why the code step appears at all. Students are not required to use MFA under the FACTS rule.
Fix 1: Check the Right Inbox (Email Codes)
Many families have more than one email address — a personal Gmail, a work email, a school email — and the code goes to the address on the FACTS account, which may not be the one you are checking. Open the email account you gave the school when you registered. If you are not sure which one that is, think about which inbox received your welcome email from the school, your report-card notifications, or your tuition statements. That is usually the address on the account. Also check whether your email app is showing all mail. Some apps have separate tabs for Primary, Promotions and Social, or a Focused inbox that hides new messages. Search your inbox for “FACTS” — the search will find the message even if it landed in a tab you never open.
Fix 2: Check Spam, Junk and Blocked Senders
If the code is not in your inbox after two minutes, check spam and junk. School-system emails are frequently filtered as spam, especially the first time, because they come from an automated sender your email provider has never seen. If you find the FACTS message in spam, mark it as “not spam” and add the sender to your contacts. Also check whether you have a blocked-senders list, or a rule that moves messages to a folder automatically.
Fix 3: Wait, Then Request One Fresh Code — Only One
Codes take a little time. Give the first code two full minutes to arrive before you do anything else. If nothing arrives, use the “resend code” link on the login screen — once. Then wait again. Every new code replaces the previous one. If you request a code five times in a row, only the fifth code will work, and the first four will all say “invalid”.
Fix 4: Use the Newest Code, Quickly
Verification codes expire. Email codes are typically valid for only a few minutes, and authenticator codes change every 30 seconds. When a code arrives, type it in straight away. For an authenticator app, wait for a fresh code to appear (one with a full 30 seconds left) and type that one.
Fix 5: Check Your Phone’s Clock (Authenticator App Codes)
Authenticator codes are based on the time. Your phone and the FACTS server must agree on what time it is, to within about 30 seconds. If your phone’s clock is a minute or two fast or slow, every code it generates will be wrong. Go into your phone’s settings and make sure the date and time are set to automatic — “Set Automatically” on iPhone, “Automatic date and time” on Android. Then close the authenticator app, reopen it, and try the fresh code.
Fix 6: The Authenticator App Shows No FACTS Code
If you open your authenticator app and there is no entry for FACTS at all, the account was never added to the app. This usually happens because the QR code was scanned with the phone’s ordinary camera app instead of the authenticator app, or because the setup was closed halfway through. To fix: log in on the FACTS Family Portal — familyportal.renweb.com or factsmgt.com/login — and go to your account or security settings. Find the MFA section and choose to reset or set up the authenticator app. Open the authenticator app itself, tap Add Account, and scan the QR code from inside the app. Type the code the app now shows into the portal to confirm. If you cannot get into your account at all to reset it, contact your school to reset MFA.
Fix 7: The Code Says “Invalid” or “Expired”
Checklist: Is it the newest code? Did it expire? Is your phone’s clock automatic? Are you typing it correctly? Codes are six digits. A common mistake is reading a 0 as an O, or a 1 as a lowercase L. Copy and paste the code from the email if you can. Are you on the right account? If you have two Family Portal accounts, make sure you are logging into the one that matches the code.
Fix 8: You Are Temporarily Locked Out
After several failed code attempts in a short period, FACTS may temporarily lock the account. This usually lasts about 30 minutes. If you have tried five or six codes and none worked, stop trying. Wait 30 minutes, then try once with a single fresh code. If you are still locked out after waiting, contact your school’s office.
Fix 9: Check Whether FACTS Is Down
Sometimes the problem is not your code at all — the FACTS system itself is having trouble. Check the official FACTS status page at status.factsmgt.com, or your school’s own announcements, before you spend an hour troubleshooting your phone. If FACTS is down, no code will arrive.
Fix 10: Try a Different Browser or Device
Refresh the login page and start again. Try a different browser. Clear the browser’s cookies for the FACTS site, then log in again. Try logging in on your phone instead of your computer, or the other way round.
What If You Changed Phones or Email Addresses?
You got a new phone: The authenticator app on the old phone holds your FACTS account. It does not move by itself. Before you give up the old phone, use the app’s transfer or export option, or set up MFA again while you still have the old phone. If the old phone is already gone, use your backup email or recovery code, or ask your school to reset MFA.
You changed your email address: If the email on your FACTS account is an old address you no longer check, the code is going to an inbox you never open. Update the email address on your account — you will usually need to do this through the school.
Never Share Your Code
A verification code is a one-time password. It is safe to type it into the official FACTS login page, and only there. Never read a code out to someone who calls you, never reply to a text or email asking for it, and never send it to someone who says they are from your school or from FACTS. Real support staff will never ask for your code.
Conclusion
A FACTS verification code that does not arrive is usually a delivery problem, not a broken account: the wrong inbox, the spam folder, or an old code typed after a new one was sent. An authenticator code that says invalid is usually a clock problem, or an app that never had the account added in the first place. Work through the fixes in order — right inbox, spam folder, one fresh code, newest code typed quickly, phone clock on automatic — and most parents are back in within ten minutes. If you have tried all of them and you are locked out, stop guessing and call your school’s front office.
Related guides: FACTS Family Portal MFA, RenWeb Login, FACTS Family Portal, RenWeb Family Portal, Homepage
Frequently Asked Questions
Why is my FACTS verification code not arriving by email?
The most common reasons are: it went to a different email address than the one you are checking, it landed in spam or junk, or you requested several codes and only the newest one is valid. Check the right inbox and spam, then request one fresh code and wait two minutes.
Why does my authenticator app say the FACTS code is invalid?
Usually because your phone’s clock is not set to automatic, so the app generates codes for the wrong time. Set the date and time to automatic in your phone’s settings and try a fresh code. The other common cause is that the FACTS account was never added to the app — the QR code must be scanned from inside the authenticator app.
How long does a FACTS verification code last?
Email codes last only a few minutes, and authenticator codes change every 30 seconds. Always use the newest code and type it in promptly.
What do I do if I am locked out of FACTS after too many failed codes?
Wait about 30 minutes and try once with a fresh code. If you are still locked out, contact your school’s front office — they can check the account and reset MFA for you.