Teachers do not use RenWeb the way parents do. Parents open the FACTS Family Portal to check on their child. Teachers open FACTS SIS — the staff side of the same system — to take attendance, enter grades, write lesson plans, and message families. It is the same platform, but the login, the menu, and the daily work are all different.
This guide explains the RenWeb teacher login step by step, what teachers find inside FACTS SIS, how the gradebook, attendance, and lesson plans work, and what to do when the login fails.
Disclaimer: Therenweb.com is an independent guide. We are not affiliated with, endorsed by, or connected to FACTS Management, RenWeb, or FACTS SIS. Teachers should log in only on the official FACTS domains — factsmgt.com, renweb.com, familyportal.renweb.com, logins2.renweb.com, or sis.factsmgt.com. Never enter a password or a verification code on any other website.
Teacher Login vs Parent Login: What Is Different?
Parents log in to the FACTS Family Portal. Teachers log in to FACTS SIS, usually at sis.factsmgt.com or through the staff login link on the school’s website. Some schools also use logins2.renweb.com for staff. The school’s IT team will tell you which address your school uses — do not guess, because the Family Portal login will not give you the teacher tools.
The second difference is MFA. From 22 April 2026, MFA is mandatory for all non-student FACTS accounts, and that includes teachers and staff. Unlike students, teachers will be asked for a verification code after the password, at least on a new device or browser. Set up MFA before term starts, not on the first morning of school.
The third difference is what the account can do. A teacher account can see the students in that teacher’s classes, enter grades, take attendance, and post homework. It cannot see tuition and billing, and it cannot see students who are not in that teacher’s classes. Access is set by the school, class by class.
What Teachers Need Before the First Login
- The staff login address. Usually sis.factsmgt.com, or the staff link on the school website. Confirm it with your school’s IT team.
- The school’s district code. The same school-specific code parents use. If you do not know it, the school office can give it to you.
- Your staff username and password. These are created by the school, not by you. The username is often your school email address. The first password is temporary and must be changed at first login.
- Your phone, with MFA set up. Either an authenticator app with the FACTS entry already added, or access to the email account that receives FACTS codes.
How to Log In as a Teacher: Step by Step
Step 1: Go to FACTS SIS — sis.factsmgt.com, or use the staff login link on your school’s website. Use only official FACTS domains.
Step 2: Enter the district code first, then your username and password, and click Log In. Passwords are case-sensitive. If this is your first login, you will be asked to change the temporary password.
Step 3: Complete the MFA verification code. If you use an authenticator app, open it and type the current six-digit code for FACTS. If you use email codes, check your inbox — and the spam folder — for the message from FACTS, and type the newest code. Codes expire quickly.
Step 4: Open the teacher home screen. It shows your classes for the day, attendance that still needs to be taken, and any messages from parents or the office. From here the main tools are Gradebook, Attendance, Lesson Plans, and the class roster.
The Gradebook: Entering and Publishing Grades
Entering scores: Open the gradebook for a class, choose the assignment or create a new one, and enter each student’s score. Always check the points possible before you start — a score entered against the wrong total will look wrong to every parent who checks it that evening.
Weighting and categories: Most schools weight categories — tests count more than homework, for example. FACTS SIS applies the school’s weighting automatically, but only if each assignment is put in the right category.
Publishing grades: In many schools, grades are not visible to parents and students until the teacher publishes them. Entering a score is not always the same as publishing it. If parents say they cannot see a grade you entered, check whether it is still in draft or unpublished.
Fixing a mistake: Only the teacher can change a grade in their own class. If you spot an error, correct it in the gradebook and re-publish.
Taking Attendance in FACTS SIS
Open the class, choose Attendance, and mark each student present, absent, or tardy. Most schools have their own codes for excused and unexcused absences — use the code the school gave you, not your own shorthand.
Submit attendance as soon as the class settles. If a student arrives late after you submitted, go back and update the record rather than leaving them marked absent for the whole day.
Lesson Plans and Homework
Lesson plans in FACTS SIS do two jobs: they organise the teacher’s own week, and they tell students and parents what was covered and what homework was set. Keep it short and specific. A lesson plan that says “Chapter 5” helps nobody; one that says “Chapter 5, pages 112-118, fractions worksheet” tells a parent exactly what their child did.
Homework can be posted from the lesson plan or from the homework section. Include the due date, the class, and any attached file. Check that the file actually opens before you publish it.
Common Teacher Login Problems
The MFA code does not arrive: If you use email codes, check spam and make sure you are checking the email address on your FACTS account. If you use an authenticator app and it shows no FACTS entry, the QR code was never scanned inside the app — scanning it with the ordinary camera does not add the account. You will need to reset MFA, which the school’s IT team can arrange.
Invalid username or password: Check the district code first, then retype the username and password slowly. After several failed attempts the account can lock for a while — stop, wait 30 minutes, and try once.
The login page will not load before class: Try a different browser, clear the cache, or try on another device. If the whole school is affected, check the FACTS status page and tell the office rather than resetting your password.
You cannot see a class you teach: Access is set class by class by the school. Only the school office or IT team can add it — no password reset will fix it.
Grades you entered are not visible to parents: The grades are probably entered but not published. Open the gradebook, check the publish status, and publish the batch.
Conclusion
The RenWeb teacher login opens FACTS SIS, and FACTS SIS is where the teaching day is recorded: attendance in the morning, grades through the week, lesson plans and homework as you go. The login itself is straightforward — district code, staff username, password, and the MFA code — but it only works smoothly if MFA is set up before term starts and the school has given you access to your classes.
Related guides: FACTS Family Portal MFA https://therenweb.com/facts-family-portal-mfa/ — FACTS Verification Code Not Arriving https://therenweb.com/facts-verification-code-not-working/ — Why Is My RenWeb Login Not Working https://therenweb.com/why-is-my-renweb-login-not-working/ — RenWeb SIS https://therenweb.com/renweb-sis/ — RenWeb Login https://therenweb.com/renweb-login/
Frequently Asked Questions
Where do teachers log in to RenWeb? Teachers log in to FACTS SIS, usually at sis.factsmgt.com or through the staff login link on the school’s website. Parents use the FACTS Family Portal instead.
Do teachers need MFA for RenWeb? Yes. From 22 April 2026, MFA is mandatory for all non-student FACTS accounts, including teachers and staff. Students are not required to use MFA, but teachers are.
Why can I not see one of my classes in FACTS SIS? Class access is set by the school, class by class. If a class is missing, you have not been given access to it yet. Only the school office or IT team can add it.
Why can parents not see the grades I entered? The grades are usually entered but not yet published. In many schools, entering a score and publishing it are two separate steps. Open the gradebook, check the publish status, and publish the batch.